ABX.0148.08 Interface 45 Pro Hard 8mm - Electric Sander

One piece per pack

PROFESSIONAL HIGH PERFORMANCE spare part – HARD version (specialized for electric sanders)

Self-modeling and self-leveling interface for electric sanders. Suitable for sanding putties and similar products. Recreates perfect shapes and angles.

 

Interchangeable abrasive backing interface, primarily designed for surface grinding and conceived for the bodywork or similar sectors, to solve all sanding problems.

It self-adapts to the curvilinear shapes of surfaces. It maintains a hard but flexible support with uniform, constant and cushioned pressure.
Eliminates unwanted undulations and significantly reduces manual work.

RED SPONGE 8MM

• Suitable for electric sanders only.
• Thanks to its 8 mm sponge height, it adapts adequately to all curvature radii present on surfaces and contains mechanical vibrations, which are amplified on this type of tool's motorization.
• It is equipped with a hypersensitive sponge to self-adapt with maximum precision and speed the steel sheet and abrasive applied to surfaces, with high performance results and qualitative perfection on the new skeletime sanding standard.

Note

View the Professional line user manual (find out more).

ADVANTAGES:

• Automatically adapts to surface profiles
• Recreates the shapes and edges of various applied materials
• Transforms the sander into a business profit tool with better work output
• Promotes greater abrasion and releases a better sanded surface. Tool-proof
• Reduces manual work by over 50%
• By spreading a larger contact surface (support/abrasive/surface), it enhances the performance of all abrasives
• On putty or similar, it perfectly wraps and recreates the shape of curved surfaces and eliminates surface undulations
• Angles and edges are perfectly recreated, or preserved from peeling

USE:

• Sanding of curvilinear parts on Putty or similar from grit P40 to P240
• Can also be used by hand on conventional hand pads for hard-to-reach parts

FIELDS OF APPLICATION:

Car bodywork, or other sectors with similar needs

HOW TO USE

• Place on the surface and operate the tool (it must not spin freely)
• For optimal performance, sanders with a 5mm orbit are recommended, and they should be used with a sliding motion following the profile of the surface to be sanded, mixing wide vertical, horizontal, and diagonal movements with medium-light pressure.
• To be used at medium tool speeds with Max 6000 RPM
• To perfect the system, it is recommended to apply it on its dedicated backing pad, Pad Totem
• To preserve its hook-and-loop adhesive, apply Interface Saver 1mm
• To further flatten its hook-and-loop adhesive and avoid micro-sanding marks, apply Interface Converter 1mm
• The Skeletime system uses hook-and-loop adhesives of the highest quality and tenacity, and if the product is difficult to detach from the Pad Totem backing pad, especially when new, a spatula with a handle should be used to help insert it between the hook-and-loop adhesive and the velour, holding the edges of the backing pad tightly. Otherwise, there is a risk of damaging the Pad Totem backing pad.